optimize windows with PC booster

PC booster and windows serves to optimize tweak RAM. This program is small and you can download via http://www.inklineglobal.com/products/pcb/. This program is freeware so you do not need to get paid. ability to customize and operate fairly easily. previously, you must perform the installation.
to run it:

• click start menu | program | PC Booster | PC booster that will display a window like the picture above.

• if you click start, the program will perform optimizations and tweaks automatically. you just wait until the end. auto tune function will optimize all components of the PC in which if capable of improving performance. program of work will optimize your hard disk, memory, file system, internet and CD ROOM.

• to run it, click Start | begin tuning and wait a while to do the optimization. when you finish, click the recommended now and will be shown which parts of which have to do optimization.

• click Optimize now for further optimization, then restart your computer.

• on the next window, you will be given the freedom in the optimization manually one by one, from the desktop tweak, start menu, internet, CD ROOM, hard disk, boot up and shutdown. you just follow the prompts and after that, you have to do manual tweaks. to end, click optimize to get the best process.

• the following window, contains a feature that allows you to make tweaks to the memory, click memory recovery and will automatically optimize your PC memory booster.

• on the last window, the burn-in test, you can perform tests on the processor to test the stability of your processor. click test option, then this option you fill in the number of times the processor will perform the test. after that, click ok and to start the test, click the start test

the process of overclocking

 
the overclock, there is a procedure or the steps you must take right, among others:

1. turn off the computer, open the casing, then grab his motherboard manual.
2. check the processor and the mark on the top and bottom of the processor, then put it back.
3. check the jumper setting multiplier and bus on the motherboard, compared with the manual.
4. check the jumper settings on your motherboard supply voltage, compared with the manual.
5. see if you have the heat sink is in conformity with the requirements overclock.
6. change the jumper for setting the clock speed and multiplier according to the instruction manual.
7. check again, no jumper is forgotten or mistakes in putting.
8. start the computer.
9. whether to enter the BIOS setup? 
10. if yes, see step 13.
11. turn off computers and change the jumper to higher supply voltage according to the manual, if possible.
12. If you still can not enter BIOS setup, you should forget about overclocking at this speed.
13. BIOS setup change from initial values​​.
14. whether the PC is capable of running the operating system?
15. if so, begin to do the test program or a utility such as BAPco Winstone suite to ensure it does not crash.
16. if not, try the 11 or check the coolant. you can also try increasing the wait states or read / write cycles from the memory. Do not forget to check out some benchmarks for the speed of passing useless if you overclock the memory access is slow.
17. if everything works well, it works. if not, try step 11, check the coolant.
18. Do not change the supply voltage unless absolutely necessary because it will make the chip more heat.
19. Do not ever forget the coolant to the heat generated in anticipation of the overclock.

if these steps are described according to the diagram, it will look like the picture above.

turn off unneeded features in Windows XP

 
windows xp has new features, which makes it different from the previous windows. however, these features may make you busy, too distracting, so you rarely use it. you do not need to worry because in windows you can disable unwanted features. how the feature should be turned off?

error reporting
 
This is a feature that is not windows xp you have encountered in previous windows. This function will let you know if an error occurs while operating a computer or run the application program so that you are correct again. This function is very good to know the error and the operation of computers, but if too often and only for a little mistake would bother you.
windows xp allow you to turn off the feature. how:
click start | control panel | system, after entering the system properties | advanced tab. at the bottom, click error reporting | disable error reporting. for the "but notify me when critical errors occur" let alone what it is. Click ok to close the application. click ok again.

MSN messenger
 
every time you get windows xp, you will always find this feature. icon located on the lower right taskbar, exactly in the system tray and will continue to display the comments balloon tips or bubbles that tell you create a new account (sign in). as long as you have not created an account, MSN messenger will not disappear from the system tray.

to run MSN messenger, your computer must be connected to the Internet. however, if you are not connected to the Internet, this feature useless. so, it's better off this MSN feature. moreover it will slow down the startup program if you do not turn off.

to disable MSN: enter the start menu | all programs | windows messenger and windows messenger window, click the tool tab | Options, then the preference tab and disable the two options on the general, which is run this program when windows starts and allow this program to run in the background.

besides, you can disable MSN by typing msconfig in the run dialog box. on the system configuration utility window that appears, click the startup tab.

automatic updates
 
update feature is only available on Windows XP only, Windows 98, ME, and 2000 also have this feature. different, these windows can not do it automatically. when you connected to the Internet, Windows will automatically update it. for users who are not connected to the internet, it's better off this function and for users who are connected to the Internet, can enable or disable automatic updates.
to disable this function: start menu | control panel | system then appears the system properties. click tab to disable automatic updates and automatic updates turn off automatic mark in updating. I want to update manually and click ok.

uninstall unused programs

when you want to get rid of a computer program for some reason, probably because the program is out and you want to replace with a new version or because the program takes a hard disk capacity is enough, you can not do it manually by deleting its folder as the when the installation program, the application program is broken down into program files folder, windows or winnt, and go to start menu shortcut and others.

delete the program folder to get rid of it is wrong. when you look in the windows add / remove programs, you still find programs that have been discarded and the program can not be lost, even if you do uninstall. when you click remove, uninstall the existing file in the windows or winnt directory will find the source file. if the source file is missing, then the uninstall process will fail. do uninstall a program in accordance with the procedure:

1. go to start menu | control panel | add / remove programs, click ok.
2. select a program on the list you want to discard. click remove

even though you have done the uninstall process windows in accordance with the procedure, but generally still leaves a few files. file is usually like a DLL or INI file. uninstall programs that you still menyisakannya in the registry or in the folder and you should get rid of manually. add / remove programs that have not been perfect windows delete files, you can use additional software, such as RegCleaner and system mechanic. The following is an example of using RegCleaner:

1. RegCleaner open the application first, then select uninstall menu.
2. select the program that you want to uninstall, and then click uninstall.

This software can also remove an invalid program or maybe you do not accidentally throw away the manual and the program's name is still there in add / remove programs. with RegCleaner, all this can be solved easily. you just choose the program that is invalid, then click remove selected and automatically invalid program name will be deleted.

then, what about his invalid registry? even if you are throwing the application program, it still leaves the rest of the registry. steps: click the software tab, then find the name of the program in which if you've wasted, but still in the list, give the check on behalf of registry program that will be discarded. click remove selected. after the process completes, click exit to close the program.

if you are confused to find invalid registry entries, you can use system mechanic program. the system mechanic, invalid registry search process easier because the program will automatically search. steps: click start menu | system mechanic | mechanic system start. then, you select the menu click on scan the system registry clean registry.

you can also use norton utilities program is quite familiar, complete, popular, and easy to operate. you can choose a menu or windoctor norton systemchek that they can fix registry errors and solve problems related to the windows system files. to run it, click windoctor norton is in the start menu. after that, norton windoctor emerging applications.

then, you select norton windoctor perform all tests, click Next to perform the scan. when the scan is complete, if there is a problem, it would appear the problem and to fix, click repaire all. automatically, norton will solve all the problems that arise. the more you diligently clean your hard disk, either remove junk files or uninstall unused programs, the more empty space on the hard disk which will help improve the performance of your computer.